Marine Ship Vessel Delta Admiralty Stockless Danforth Pool Anchor CCS BV LR ABS GL DNV RINA

Specification

Picture

Marine Boat Anchors

Anchor

Anchor generally refers to ship anchor, which is the main component of anchoring equipment. The iron boat anchoring equipment is connected to the boat with iron chains, and the anchor is dropped to the bottom of the water to make the boat stop stable.

There are many types of anchors, and large holding power anchors are commonly used in drilling platforms, as shown in Figure 1. The main feature of this anchor is that its grip can only be guaranteed when the pulling force is horizontal. If the pulling force has a vertical component, the grip is reduced, and the anchor claw will be pulled out of the soil. Experiments show that the grip force of the anchor handle turned up 6° began to decrease, and the grip force of the anchor handle turned up 12° decreased significantly. Therefore, the lower end of the anchor chain must be tangent to the seabed when anchoring, otherwise there is a danger of anchoring. Lifting the anchor is to take advantage of this feature. Pull the anchor chain upward to lift the anchor handle. The anchor loses its grip and finally breaks out.

Marine Boat Anchors

The choice of anchor should consider convenient operation, convenient storage and economical application, but the most important thing is the holding power of the anchor. On the one hand, the holding power of the anchor is not known because of the different types of anchors, on the other hand, it is related to the soil quality of the seabed.

With the advancement of ocean development to deep water, new requirements are put forward for anchoring. In deep water, if the lower end of the anchor chain is still required to be tangent to the seabed to ensure the anchor's grip, the required chain is very long. Therefore, it is necessary to study anchors that can withstand vertical component forces, such as cement weights or anchor piles. When piles cannot be driven under lithological seabed, bored cast-in-place anchor piles can be used. Some anchors are designed according to the specific seabed, and the working performance of the anchor is poor when used in the seabed situation that does not meet the design requirements. Although there are formulas for calculating the holding power of various anchors under different seabed conditions in Figure 1, the true holding power of the anchor needs to be determined through field tests.

Equipment composition of windlass

The windlass is mainly composed of base, support, anchor sprocket, brake, sprocket, gearbox, electronic control system (except manual windlass), etc. The electric windlass has a motor, and the hydraulic windlass has a hydraulic pump station.

The main technical indicators of the windlass include the diameter of the anchor chain, the nominal speed of the anchor, the rated load, the supporting load, several speeds, and the electric system.

The installation of the windlass on the ship should ensure that the wrap angle between the anchor chain and the sprocket is 117-120 degrees.

Chongqing Juvi marine machinery company is an integrated marine technology company that presently specializes in product design, production, and sales.

The Juvi has both, a professional technical staff and strong sales team. Our products have sold to regions as far away as Europe, North America and Asia, among others. Furthermore, our professional technical staffs are able to provide our clients with the perfect solution at the perfect time, while also offering consummate service specifically catered to the individual needs of each and every client. We regularly introduce the most advanced foreign products and technologies into the domestic market and routinely share the latest in scientific and technological advancements with related domestic industries.

Juvi company is administered by the marine equipment production systems. In addition, our company has established longstanding partnerships with other outstanding firms in our industry, thus achieving both technical collaboration and the very best aspects of product sharing, using them to the advantage of our customer base. Every factory that our partner with has passed the CCS,ABS,DNV,LR,NK,RINA,ISO9002, TS16949, UL and other related systems authentication.

More than 10 years of accumulated experience, high-quality products, coupled with our philosophy of absolute integrity in all business dealings have earned us unanimous praise from old and new clients alike, as well as a distinctive reputation in the industry. We look forward to providing your firm with our patented brand of reliable product quality and superior service, just when you need it.